Hoist Reducer Gearbox For Tower Crane

Caixa de Velocidades de Elevação

O ajuste de velocidade do polo variável também pode ser adicionado ao redutor de deslocamento eletromagnético para dobrar o número de engrenagens de ajuste de velocidade. Este ajuste de velocidade é aplicado principalmente ao guindaste de torre com capacidade de elevação de 450-900 kN.m.

Hoist Reducer

Hoist Gearbox

70RCS 55RCS 45RCS

Hoisting Reducer

Hoisting Gearbox

RCS hoist reducer

RCS hoist mechanism reducer is the speed reducing appliance for hoist mechanism, connected between motor and drum, which consists of a set of gears(19 teeth gear, 38 teeth gear, 99 teeth gear ) and bevel gears. High speed rolling motor shaft connect to reducer, and the speed was lowered by the transmission of gears.

With best raw material and delicate casting machines, our reducer is of smooth transmission and longer service life.

Hoist Reducer Gearbox For Tower Crane

Hoist Reducer

Hoist Gearbox

70RCS 55RCS 45RCS

Hoisting Reducer

Hoisting Gearbox

Tower Crane Knowledge sharing：

What are the steel-speed adjustment methods of Tower lifting mechanism? What are the characteristics of each?
What are the steel-speed adjustment methods of Tower lifting mechanism? What are the characteristics of each?
1. Rotor string electronic speed regulation of winding motor
This kind of speed regulation can change the speed of the motor by connecting the variable resistor in series in the rotor winding, and using the operation handle to send the main signal to control the contactor, so as to switch the resistance to change the speed of the motor, so as to achieve the requirements of smooth start and uniform speed regulation. Some winding motor rotor string electronic speed adjustment, but also can increase the electromagnetic shift gear reducer, this way can use speed adjustment to double the number of stops.

Hoist Reducer Gearbox For Tower Crane

Hoist Reducer

Hoist Gearbox

70RCS 55RCS 45RCS

Hoisting Reducer

Hoisting Gearbox

2. Double speed winding rotor string resistance speed adjustment
The motor has two kinds of pole logarithm, which are regulated by two ways: string resistance and pole change.
3. Double motor drive speed adjustment
This kind of speed regulation application is to use two winding type motor drive. The two winding motors are connected by a gear with a speed ratio of 1:2, one as a drive motor, and the other as a brake motor.

Double motor speed adjustment can also be driven by a winding motor plus a cage motor or two multi-speed cage Motors, which can obtain different speed regulation characteristics.

Hoist Reducer Gearbox For Tower Crane

Hoist Reducer

Hoist Gearbox

70RCS 55RCS 45RCS

Hoisting Reducer

Hoisting Gearbox

This lifting mechanism can speed up during load movement, and can achieve airborne descent at maximum speed, thereby improving production efficiency, lifting can be accurately in place, work smoothly, and have a large speed range of 1:40.

However, the mechanism is relatively complicated, and its transmission parts need to be specially designed and manufactured. Mainly used in large and medium-sized tower hanging.
4. Variable speed regulation
By changing the extreme number, the rat cage motor can obtain the working speed of the upper and lower gear and the slow positioning speed of the first gear.

 Basically, it can meet the speed regulation requirements of the tower crane and simplify the mechanism. However, the impact of the gear shift is large, and the speed regulation range is 1:8. About。And can not run at low speeds for a long time. It is mainly used for light and small tower cranes below 40t.m.

Hoist Reducer Gearbox For Tower Crane

Hoist Reducer

Hoist Gearbox

70RCS 55RCS 45RCS

Hoisting Reducer

Hoisting Gearbox

The variable pole speed adjustment can also be added to the electromagnetic shift reducer to double the number of speed adjustment gear. This speed adjustment is mainly applied to the tower crane with lifting capacity of 450-900 kN.m.